Certifications

Banerabath Bathtub Standard Packaging

Installation Instructions

Care Maintenance

BaneraBath bath-ware is crafted to be non-porous, and will prohibit liquids and chemicals being absorbed. The result is an easy care and hygienic bathroom material. Although BaneraBath surfaces are tough and durable, they are not indestructible. They will require regular maintenance to keep the product’s surfaces at their best.
As with most things in life, prevention is better than cure, so please read the recommendations below to ensure that you enjoy years of service from your investment in BaneraBath.

1. Day-to-day
After use, remove any residue from soap, shaving, or brackish water by rinsing and a quick wipe over with a damp sponge or cloth.

2. Regular Bathroom Cleaning
When conducting your regular bathroom cleaning, simply wipe over the surface with diluted dishwashing liquid. An ammonia-based cleaner such as Spray-and-WipeTM* can also be used. Rinse and wipe over using a clean damp sponge.
To remove build-up of lime, hard water scale or soap residue, use a standard household lime remover or diluted white vinegar, rinse well.

3. Spills
If a spill of dye, nail polish, harsh household chemicals or the like occurs, in most cases staining can be prevented
with minimal effort. Immediately rinse using appropriate safety measures, and wipe over with warm soapy water.
Clean the entire surface using a mix of 5% Mild Cream Cleanser to 95% diluted dishwashing liquid applied using a damp sponge. To maintain uniformity, do not apply too much pressure nor rub in the same area for a prolonged time. Rinse well and wipe clean.
If the spill has not been totally removed, proceed to Paragraph 4. “Stubborn Stains, Scuffs and Cigarette Burns” for instruction.

4. Stubborn Stains, Light Scuffs & Cigarette Burns
Matte Surfaces: Apply a Mild Cream Cleanser to the entire surface, using a damp fine grey Scotch-Brite** pad rub in a wide circular motion. Be sure not to apply too much pressure nor rub in the same area for a prolonged time.
Before rinsing, clean the entire surface using a very wet sponge in a wide circular motion. Rinse well and clean. A matte / sheen luster will result.
Gloss Surfaces: Lightly sand the entire surface with 1200 grit wet sand paper using a foam or similar soft sanding block. Finish with Turtle Wax Brand “Scratch and Swirl Remover” using the foam pad provided. Apply according to manufacturer’s instructions.
For detailed instruction or assistance, please contact your local Bella Stone Supplier.

5. Prevention
Do not use abrasive cleaners, steel wool, metal implements or objects with sharp edges on the surface of your BaneraBath bathroom-ware product.
Excessive heat, naked flames, ultraviolet radiation or harsh chemicals may also cause damage to your BaneraBath surface.
In most cases, BaneraBath will withstand even this abuse by following the rejuvenation process out outlined in item 4. Stubborn Stains, Light Scuffs and Cigarette Burns.
* ”Spray & Wipe” is a registered trademark of Colgate-Palmolive.
*  “Scotch-brite” Registered trademark of the 3M Company.
 

5 Year Limited Warranty

1. The Warranty
Banera Bath Company Limited (the “Supplier”) gives the following Warranty in respect to bathroom-ware and associated items manufactured, marketed and or sold by it (the “Product”), subject to the terms and conditions set out below.

2. 5 Year Product Warranty
The Supplier warrants for a period of five (5) years from the date of initial purchase to, at its sole option repair, replace with an equivalent Product free of charge or issue a credit for the purchase price, any Product that is found after inspection or assessment by a representative of the Supplier, to be defective in construction or material.
The Supplier warrants accessories such as wastes and the like that may be supplied with the Products as an optional purchase or as part of a package for a period of one (1) year from the date of initial purchase.

3. Claims
All claims under this Warranty must be made by notice in writing issued to the Supplier and include:
(a) Invoice Number;
(b) Date of dispatch from the Supplier’s factory; and
(c) Description and other information including but not limited to pictures and diagrams of the alleged defect(s) in such detail reasonably requested by the Supplier to make an assessment of the claim.
Within 28 days after the occurrence of any event which gives rise to a claim pursuant to this Warranty.

4. Not Covered by this Warranty
This Warranty does not cover damage or defect arising out of:
(a) fair wear and tear;
(b) misuse, abuse or mishap;
(d) failure to clean or maintain the Products in accordance with the Supplier’s instructions;
(d) exposure to excessive heat, direct flames, ultraviolet radiation or harsh chemicals;
(e) use of abrasive cleaners, steel-wool, metal implements or objects with sharp edges on the surface of the Products;
(f) Incorrect installation, installation not in accordance with the Supplier’s instructions or installation by any person other than a licensed plumber;
(g) damage or any other defect or fault that should have been reasonably detected before or during installation; and or
(h) any occurrence that is not due to a defect or fault in the manufacture of Products.

5. Supplier’s Liability
(i) To the fullest extent permitted by law, the Supplier excludes all liability for damage or injury to any person, damage to any property, and any indirect, consequential or other loss or damage.
(ii) The Supplier’s liability for a breach of any expressed term or condition under this Warranty or any non-excludable, implied term or warranty is limited at the option of the Supplier to:
(a) repair of the Products;
(b) replacement of the Products; or
(c) purchase price of the Products: that breached this Warranty.

6. Governing Law
This Warranty is governed by and construed in accordance with the laws of the Peoples’ Republic of China.